The FediFridayWinlinkNet question of the week on 5/31/24 was “What is the most interesting or unique place from which you have operated a #hamradio?” We had some really interesting answers! See the list below.
Here are the responses to the #FediFridayWinlinkNet question from 05/03/2024: What are your #hamradio weekend plans?
It’s been quite a while since I updated this blog, so a great time to post an update on some projects and interesting items I’ve bumped into on the Internet.
First, an update on a concept called White Rock Hams that we started over three years ago with a mention on this blog. It’s since turned into a real club with many activities and a pretty good following with over 30 members. We’re using groups.io for all of our messages and files, and hamclubonline.com for official club stuff. Both of these tools have been extremely useful in keeping members informed and active. You can follow all of our exploits at wa5wrl.org which is the vanity call sign we were able to snag from the FCC.
In Internet news, I am just about ready to pull the plug on Twitter. I was a very early adopter personally and helped get my Fortune 500 employer back then on board. Since Musk has taken it over, it’s become quite a dumpster fire and I’m not sure how much longer I can stand it.
I’m spending more of my time now on Mastodon. I like that it’s federated and non-centralized. Sort of feels more like the way the Internet was supposed to be in the first place. It’s not owned and run by a tight group of billionaires. If you’d like to join us, take a look at joinmastodon.org. Scroll though the servers and pick an interesting one, or just use mastodon.social like many folks do. You’ll find a lot to like, including authors you’ve probably seen previously on Twitter. And, if you’re a ham, choose mastodon.radio! Don’t sweat about the server choice, though, since they all connect together. Once you’re on, you can find me at @n5csu.
I’m getting a kick out of my hamclock running on a little inovato computer. This device has become a must-have for active hams that use the high frequency bands.
I’d like to give a shout out to the website blogs.radio, a great place to find updated blogs by ham radio operators.
That’s about it for now. I’m composing this using Word on my iPad via microphone for the first time, then pasting into WordPress. It’s so much better than my two finger typing.
73
For AGC controlled IF stages in receivers I have often chosen a 2 or 3 stage dual gate MOSFET strip, or a cascode arrangement with a bipolar and JFET pair. These work well, have more than enough overall gain, and provide good AGC-controlled gain range. I’ve also built a BiTX style transceiver (Andy G6LBQ’s design) with two Termination Insensitive Amplifier blocks. TIAs exhibit stable input and output impedance regardless of load, and work symmetrically (for receive and transmit) but are fixed gain. My BiTx receiver worked acceptably on 40m but was underpowered on 20m. Increasing the gain to make it more lively on 20m would have made it over-powered on 40m. You don’t have this problem when you have an AGC controlled IF.
So when I saw a mod by George VK4AMG to increase a friend’s uBiTx receiver gain on 28MHz I was very interested.
The uBitx transceiver uses Termination Insensitive Amplifiers in the high and low intermediate frequencies. The Termination Insensitive Amplifier is a design element of great pedigree. It originated with some Plessey radio transceiver designs in the 60s and was popularized for amateur use by Wes Hayward W7ZOI and Bob Kopski K3NHI.
On the uBitx page, designer Ashar Farhan VU2ESE writes … “We used the excellent termination insensitive amplifiers (TIA) developed by Wes Hayward and Bob Kopski (read about them on www.w7zoi.net). These amplifiers work without transformers and they provide excellent termination on both sides. This is a key requirement for bidirectional transceivers like the µBITX . We use four blocks of these amplifiers in this transceiver. The amplifier block has a gain of 16 db and OIP3 of about +20 dbm as measured inside the µBITX .”
So I prototyped the uBitx TIA with George’s mod, a 2N3904 in place of the 10 ohm emitter resistor. I first drew it in kicad. It’s easy to see how the additional transistor replaces the usual low value resistor in the emitter degeration.
Built on a scrap of etched PCB using surface mount parts.
I measured 14dB of total gain this block, not the 25 to 30dB I expected, with 14dB AGC action. Here are some measurements:
The amp stage is flat to about 15MHz, that’s good. And at 8V of AGC the block delivers 19dB of gain which is about spot on for a typical receiver, assuming you will use two or three such blocks. I dropped the 3k3 resistor in series with the controlling 2n3904 base to 1k and measured nearly 20dB of gain.
Next, I built two of these gain controlled TIA blocks in an IF strip for a CW superhet receiver. A narrow crystal filter provides the intended CW receiver bandwidth, adding 3 to 5 dB attenuation in its passband. The bench test is shown in the video — 50dB of total gain with 30dB of AGC range, not as much as can be achieved with MOSFETs, or as much as George measured, but still a useful range.
Next, I shared a knock-up video with Bill and Pete from Soldersmoke, as they have both been strong promoters of the TIA in their projects and through the podcast and blog. Bill wondered what other side effects of varying Rd might be, and that sent me back to Wes and Bob’s 2009 paper. Another likely consequence is that dynamically changing Rd is likely to change the input impedance away from the desired 50 ohms. So the AGC controlled TIA is not really a TIA anymore.
Is this a useful TIA hack? Certainly the gain swing is useful. The impact of having the TIA gain block’s input impedance swinging around in sympathy with signal strength does not sound ideal, but probably depends on what each block is interfacing with. In my prototype receiver, the second TIA block interfaces to the output side of the 4MHz crystal filter via a matching transformer. An impedance mismatch here will result in some power loss. The first TIA interfaces with the output of a ‘strong’ 2N5179 post-mixer IF amplifier stage, which is via a 50 ohm pi-attenuator.
I you find this TIA ‘hack’ interesting and maybe give it a try. Please let me know what you think of it in a video comment.
Thanks to George VK4AMG for sharing it on VK Homebrew on Facebook and for subsequent email correspondence.
Login