![](../themes/icons/grey.gif)
Normal view
-
This Week in Amateur Radio
- PODCAST: This Week in Amateur Radio Edition #1327 β Truncated 1-hour version
Amateur radio videos: Extreme toroid winding, CW bandwidth, KB6NU on LICW
Need to wind some toroids?
While Iβm waiting for my QRPLabsβ QMX kit to arrive, I thought Iβd try to learn something about toroid winding. This video takes toroid winding to a whole new level.
W2AEW on CW bandwidth
Question T8A11, in the Technician Class question pool asks, βWhat is the approximate bandwidth required to transmit a CW signal?β The correct answer is 150 Hz. The question says βapproximateβ because the bandwidth depends on the speed at which the Morse Code is being sent.
In this video, Alan, W2AEW, actually makes some measurements to determine the bandwidth of a CW signal.
KB6NU on LICW
A couple of weeks ago, Bob, K4LRC, Β asked me to speak to the LICW Portable Ops group about getting better at CW. I guess they ran out of qualified speakers. I donβt know if the group learned anything, but it was fun to speak to the group. TL;DR getting on the air and making contacts is the best way to improve your CW.
About UV-K5 CEC Firmware Version 0.1X (from v0.1p)
Β About UV-K5 CEC Firmware Version 0.1X (from v0.1p)
1.About Version 0.1X
This version is the stable version of UV-K5 Version 0.1P
In Version 0.1P, many things were changed, including the internal variable structure, and we received feedback for about 8 days to check if there were any problems.Β The original plan was to just change the name from Version 0.1P to Version 0.1X, but several features were added as follows. Please read Version 0.1P for main features
2.SSB Filter (bandwidth)
Β Β The filter can select one of these : VFO, 3K, 2K, 1.7K, 3K+, 2K+,1.7K+Β Β
Β This filter operates only in SSB mode and is disabled in existing FM mode.Β Β If you select a filter with +, the + mode is also applied to CW mode
Β VFO :Β Previous firmware state. It is selected among WIDE/NARROW selected in VFO
Β 3K ~ 1.7K :Β When actually measured, it is a little wider than stated.
3K+ ~ 1.7K+ :Β It improves the functionality of the existing filter. Based on SINAD, there is an improvement effect of about 1dB.
3.SSTVΒ
3.1Β Scottie 1 ModeΒ
Scottie1 mode was added to the existing Martin1 mode. You can select it from STVEnc in the settings menu.
3.3Β QSO TX Number
Β SSTV transmission sequence record.Β It is displayed at the top right when transmitting SSTV.
3.4Β SSTV transmission resolution has been increased.Β If this causes problems, I plan to reduce the resolution again.
X-TAL is not connected to the MCU (CPU) used in UV-K5. (Internal LC res) So, there is a slight problem during precise transmission like SSTV.
4. DownloadΒ
https://github.com/phdlee/uvk5cec/releases/tag/v_0.1x
-
Ham Radio with K0PIR β Icom 7300 and 7610 SDR Transceivers
- Icom 7610 And Elecraft K3S SSB Receiver Settings
Icom 7610 And Elecraft K3S SSB Receiver Settings
Ham Radio With K0PIR
Among amateur radio operators, the Icom 7610 and Elecraft K3S radios stand out as popular choices, renowned for their superior performance and advanced features. Despite their impressive attributes, these radios can be further optimized by adjusting their SSB listening receiver...
The post Icom 7610 And Elecraft K3S SSB Receiver Settings appeared first on Ham Radio with K0PIR - Icom 7300 and 7610 SDR Transceivers and now Elecraft!.
Higher Fidelity OpenWebRX 1.0.0
Some simple tweaks to a few text files try to make OpenWebRx more compatible with wider AM and FM RF bandwidths.
The post Higher Fidelity OpenWebRX 1.0.0 appeared first on Ham Radio . Magnum Experimentum.
Copper efficiency after weathering
I use a weathered copper small transmitting loop to see if copper oxide affects antenna conductivity and hence efficiency.
The post Copper efficiency after weathering appeared first on Ham Radio . Magnum Experimentum.