❌

Normal view

There are new articles available, click to refresh the page.
Before yesterdayMain stream

RealVNC Changes Terms, without Notice.

By: AA4LR
17 June 2024 at 16:56
Just over three years ago, I figured out how to Remotely operate FT8Β using a product called RealVNC.Β 

RealVNC had a Home plan that allowed up to 3 users and up to 5 devices for non-commercial use. Perfect for remotely controlled computers in a ham radio shack.

Today, without any notice, RealVNC disabled my Home plan, and I had to choose between paying each month for a plan, or adopting their Lite plan, which allows 1 user and up to 3 devices for non-commercial use.

That's fine. They allow me to use their secure remote access software without fees. I can understand they might want to change the terms.

The Lite plan fits my usage. I've only ever had two devices active anyway, and it's just me as the user.Β 

But, without notice - that is just damned inconvenient. Since I switched plans, I need to visit each device and re-configure them to be part of the new plan. Which means I can't remote into those computers until that is completed.Β 

And, of course, since I'm remote, I'm not there.

Quite inconvenient.



How 1984 wasn't like "1984."

By: AA4LR
14 February 2024 at 13:00

In 1984, I was working at Hayes Microcomputer Products. They were the premiere modem manufacturer for small computers, back in the days when modems over telephone lines were a primary means of computer to computer and user to computer communications.Β 

In my job, I created communications software to talk to the modems. The software dialed the modem, established connection, provided terminal emulation (my specialty), allowed for the capture of the data stream to files, printing, file transfer with the remote computer (using protocols like XMODEM and YMODEM), and other features.Β 

These were the early days of personal computing. IBM introduced the PC in 1981, and it had rapidly evolved into a defacto standard computer, shoving out various CP/M designs from the previous decade. Personal computers were so new, people were trying to figure out what to do with them. Word processing, spreadsheets and other office applications had just been introduced.Β 

Hayes was trying to stay at the forefront. We had a laboratory filled with pretty much one of every personal computer, and when new ones came out, we would buy one. In late 1983, we got an Apple Lisa. It was a very different kind of computing experience. It was a curiosity to us, and as there was no programming environment available, we didn't see how we could build software to talk to a modem. Plus, at the price point, there were few buyers.

The Macintosh

Though the Macintosh was introduced in January of 1984, I didn't get hands on one until the late spring of 1984. Yes, we brought one into the lab, and it immediately garnered a lot of attention.Β 

While there were similarities to the Apple Lisa, the small screen with square pixels just seemed sharper and more distinct. The whole interface was friendly and approachable. We messed with MacWrite, MacPaint, and MacDraw. We printed on an ImageWriter, making appreciably decent images unlike anything we could do on another type of computer. There were several of us hooked and enthusiastic.

It's hard to describe those days. At this point, everyone has had decades to become familiar with computers that use a graphical user interface and a mouse or other pointing device to interact. Back then, it was a revelation. It was much more approachable than the command-line interfaces of the day.Β 

As I described it to someone in the early 90s -- other computer interfaces required one to reach toward the computer. You had to learn the special language and commands of that computer. The Macintosh was the first computer that reached back toward you -- the user.

The Machine

The Macintosh was based on a 16-bit Motorola MC68000 processor, running at 8 MHz. This was more than competitive with the Intel-based IBM clones circulating at the time. This processor was a great choices by Apple. It had many registers and powerful instructions for manipulating the bit-mapped screen.

Biggest constraint was memory. The 128 KB in the Macintosh was shared with 24 KB used for the screen, several more KB for operating system usage, leaving about 90 KB to run your program. Most of the critical operating system routines were in the Macintosh ROMs, which saved space. Building a program of any sophistication was difficult -- It was very tight to work with.

The single 400 KB floppy disk drive was also a limitation. Trying to save a file to another diskette could produce an endless amount of swapping. It was the lack of addition storage that kept me from buying a Mac until the Mac SE/20 was introduced in 1987.Β 

Next Steps

By summer, Hayes hired some consultants to look into the feasibility of developing communications software for the Macintosh. In just a few weeks, they had some rudimentary software going and concluded that it was quite feasible.Β 

We were soon green lighted to create a product for the Macintosh.

Forty Years of Personal Computing - The Big Toss Out

By: AA4LR
30 June 2023 at 12:00
Some time in 1985, I had one of those moments I regretted.Β 

I'd gotten my MC6809 system running in late 1983, running the Flex09 operating system on 8" floppy disks. I had a full set of documentation for several pieces of hardware and software. My new job kept me busy, so I didn't have much time to work with my system at home.

August of 1984, I began programming the Macintosh at work. We published our first product in March of 1985. The Macintosh was a revelation -- it completely changed the metaphor for computing. I saw early on that it was the future. But, I couldn't afford one right away. I wouldn't buy my first Mac until the summer of 1987 -- a Macintosh SE. I've only purchased Macintosh computers since that time.Β 

In the late spring of 1985, I prepared to move to a new apartment. I had bulky boxes of documentation in my closet. I figured that I'd never do anything more with that MC6809 system -- the Macintosh was the future.Β 

I threw nearly all of the documentation away.Β 

Two months later, in the new apartment, I regretted my decision. There were things I could do with my MC6809 computer. I had to replace the missing documentation.Β 

To this day, I'm not sure I found replacements for everything I had.

Remote Operation - Level 0 (RealVNC)

By: AA4LR
29 April 2021 at 02:03

Sometimes experiment pays off. You never know until you try.

I was reading an article about remotely controlling computers over the internet. It occurred to me that if I could do this, it would be easy to operate FT8 from my Gwinnett QTH when I was at the Fulton QTH. Although I have rigs in both locations, Gwinnett is where I have the K3, and can operate on 6m.Β 

I started to research solutions. I found a product called RealVNC that can be licensed free for non-commercial use on up to five computers. Comes with a separate server and viewer product, and it works on Macs as well as Windows, Linux, even the Rasberry Pi.Β 

You have to create an account on their web site, but the installation was easy. I have a MacBook Pro hooked to the K3 at the Gwinnett QTH. I installed the server there. Then I installed the viewer software on a couple of Macs, and one Windows computer.Β 

Making the connection from Viewer to Server requires 2-factor authentication, so it is pretty secure.Β 

This software worked great. I was easily able to connect to the MacBook Pro and use WSJT-X. The K3 has to remain turned on, and I have no way to remotely change antennas, so I left it switched to the 3-element 6m beam. I also have no way to rotate the antenna remotely (it uses Armstrong rotation...), so I left the beam pointing SouthEast. I was hoping to pick up some propagation to the Caribbean or perhaps Central or South America.Β 

The first week of this experiment bore fruit the next day. I was in Fulton county, but checking I lucked into an opening to South America, where I worked two stations in Chile and two in Uruguay. Two new countries and four new grids! The next day, there was a powerful, but brief opening to the Cayman Islands, and Belize.

While one cannot predict 6m propagation, remote operating gives me a tool so I don't miss out on openings while I'm away from the Gwinnett QTH.Β 

This is only Level 0 of Remote Operating. I can only do FT8, and I can't change bands. That's next, I'm working on an automatic antenna switch driver to choose an antenna by the band selection of the K3.Β 

❌
❌