ANOTHER Great Workshop
Β
Β
First - the plugs:
support some repeaters financially, or with donations of equipment, or by connecting an existing repeater to the Pride Network
Buy some cool stuff to support my passion projects!
Clubs that are so inclined, should use the opportunity to show that their club is welcoming to everyone, by flying the colors at their field day site! To encourage promotion of Pride at Field Day sites, Iβm going to do a little last minute contest!
To βenterβ send your pictures of your Field Day Pride Display to:
n3vem.radio@gmail.com
or post them to mastodon and tag me, @n3vem@mastodon.radio, in the post.
The winner will be chosen by a distinguished panel of judges (my family!), and will be able to choose any 3 clothing items from my Subversive Radio Shop to give to the members of their club or group that they think would most appreciate them!
fine print - winners will only be chosen from places I can ship too - see the shop for details on shipping locations for clothing items. All Items must be shipped to a single address, with the winner taking care of distributing the items to their club/group members on their own. Pictures should include enough in-frame to make it clear that the display is at an ARRL Field Day site.
I have a Tait TM8110 VHF transceiver that is destined for use on packet radio. This was sold as untested but appears to work fine. However, in testing I was concerned that the bench PSU I connected it to showed a current draw of 0A. The radio was making noise and, connected to the Bird and a dummy load was generating RF. Anyway, I programmed it with the various packet frequencies, power settings and ensured the bandwidth was 12.5kHz and tried it on air. It was working fine on both tx and rx. But still 0A draw. Hmmm.
I have two identical bench supplies, Lavolta BPS-305, 30V 5A units. One has a noisy fan so I use the other. I swapped to the noisy one and it shows reasonable current draws for rx and tx. And then the noisy fan decided not be noisy any more (still working though!) so perhaps the noise from this PSU was just it sulking from being ignored.