Remember yesterday when I mentioned the latest addition to my POTA setup, the Xiegu 5105 QRP rig….

Well this morning I decided to test it out and see how much work I would have to do with setting the parameters such as mic gain, processor, to make it sound like me… I was also testing out my EARCHI 9:1 unun with a 29.5 foot random wire to see how it would play with the built in AT of the 5105.

I figured I might as well do the testing at a POTA location just in case I was able to turn the test into an activation.

For this I chose Fort Frontenac POTA CA-5303. Its fairly easy to get there via the Kingston Transit system and its also close to downtown and all the amenities I might need. In the North East corner of the picture you will notice some white lines on the ground.

They are actually the walls of what’s left of that part of the Fort. Also the only parts of the Historic Site that is open to the public.

I leaned my MFJ 33 foot mast (supporting the 9:1 and wire in the vertical configuration) up against the tree.

And then ran the COAX over to the remains of the wall and set up my radio there and started operating.

My first contact was on 7.255 with the NCS of the ECARS net. He did hear me and considering I was QRP I was pleased. He did tell me that my audio seemed hot as if I was overdriving things. Lowering my voice seemed to help.

After that I looked at POTA Spots and managed to get W2IDG and VE3FI into the log from their parks and then finished up with the NCS of the MidCars net on 7.258.. All contacts were made on 40m SSB. I tried 20 SSB and was hearing lots of stations including a POTA Activation in VO1 but no luck breaking any of the pileups.

Then I figured it was time to get home and try to re configure the radio to my liking… I turned off the Speech Processor and lowered the Mic Gain from 60 to 40. Over the next few days I will get out again and see what else I have to do to get things sounding right.

Till then

73bob

Remember yesterday when I mentioned the latest addition to my POTA setup, the Xiegu 5105 QRP rig….

Well this morning I decided to test it out and see how much work I would have to do with setting the parameters such as mic gain, processor, to make it sound like me… I was also testing out my EARCHI 9:1 unun with a 29.5 foot random wire to see how it would play with the built in AT of the 5105.

I figured I might as well do the testing at a POTA location just in case I was able to turn the test into an activation.

For this I chose Fort Frontenac POTA CA-5303. Its fairly easy to get there via the Kingston Transit system and its also close to downtown and all the amenities I might need. In the North East corner of the picture you will notice some white lines on the ground.

They are actually the walls of what’s left of that part of the Fort. Also the only parts of the Historic Site that is open to the public.

I leaned my MFJ 33 foot mast (supporting the 9:1 and wire in the vertical configuration) up against the tree.

And then ran the COAX over to the remains of the wall and set up my radio there and started operating.

My first contact was on 7.255 with the NCS of the ECARS net. He did hear me and considering I was QRP I was pleased. He did tell me that my audio seemed hot as if I was overdriving things. Lowering my voice seemed to help.

After that I looked at POTA Spots and managed to get W2IDG and VE3FI into the log from their parks and then finished up with the NCS of the MidCars net on 7.258.. All contacts were made on 40m SSB. I tried 20 SSB and was hearing lots of stations including a POTA Activation in VO1 but no luck breaking any of the pileups.

Then I figured it was time to get home and try to re configure the radio to my liking… I turned off the Speech Processor and lowered the Mic Gain from 60 to 40. Over the next few days I will get out again and see what else I have to do to get things sounding right.

Till then

73bob