On Thursday, May 16, I attended Four Days in May (FDIM), an event put on by the QRP Amateur Radio Club International (QRP ARCI). The first FDIM was held in 1996, and QRP ARCI has held it every year since, excluding the Covid years. This year, nearly 300 people attended the event.

Like the name implies, there are FDIM events on Thursday, Friday, Saturday, and Sunday, but the main event is the series of talks on Thursday. These start at 8 am and run until 5 pm. This year, the talks included:

• The Construction and Use of a WhoZat by Jack Purdum, W8TEE. Jack is a retired professor from Purdue University, a frequent speaker at FDIM, and the designer of many microcontroller-powered ham radio projects, including transceivers and antenna analyzers. This year, he talked about his latest design, the WhoZat. WhoZat is a portable, battery-powered device that allows an operator to type in a call sign prefix and obtain information about the country associated with the callsign. It will give you the country name, and the azimuthal bearing from your location to that country. One of the takeaways from this talk is that the WhoZat is powered by a Raspberry Pi Pico, and Jack encouraged everyone to consider the Pico for future projects because it has more computing power and more memory than most Arduinos.In addition to talking about the WhoZat, Jack was promoting his latest book, Digital Signal Processing and Sofware Defined Radio. It’s available on Amazon for $45.
• Top 10 Junkbox Projects by Hans Summers, G0UPL. Hans is the genious(?), madman(?), entrepreneur(?) behind QRP Labs. In this talk, he extolled the virtues (as I have done) of a well-stocked junkbox. The project that resonated the most with me is the one-tube transmitter.The reason it resonates with me is that I’ve been threatening to build one for years myself. Hans actually did it, though. In fact, he made his first QSO with a transmitter he built from an ECL82 tube.At the end of his talk, Hans gave a little plug for his newest transceiver, the QMX+. The embedded SDR rig covers 160 – 6m, in a slightly bigger form factor than the QMX, for only $125. It’s incredible, really.
• zBitx–A Portable Station for the CW Operator by Ashar Farhan, VU2ESE of HF Signals. In this talk, Ashar described his zBitx, a portable CW/FT8 SDR transceiver. This isn’t a radio that Ashar is selling (yet!), but it does look like a complete design. And, of course, that design is completely open source, something he ribbed one of the other presenters about.

  

  This radio is powered by a Raspberry Pi, specifically the Raspberry Pi Zero 2 W. This module costs $15 and runs Linux. Ashar says, “If Arduino was a matchbox RC car, this Raspberry Pi is an Airbus A380, both in terms of size and speed. It can run WSJT X, fldigi, and full-stack SDR.” The radio also takes advantage of the WiFi capablity of the RPi. There’s an app that runs on a smart phone that acts as a front panel.

  At the end of his talk, instead of flogging a product, Ashar passed out a small PCB assembly called the sBitx Hat. Designed to plug into a Raspberry Pi, it includes an Si5351 clock generator and a 96 kbps, dual-channel audio codec. It looks it will be a fun thing to play with.

• Adventures of a QRP Evangelist by Cliff Batson, N4CCB, proprietor of the QRP School YouTube channel. Cliff gave us a primer on QRP operation and on how to make YouTube videos. He encouraged us all to go out and make videos. I’m not so sure about this myself. It seems to me that there is already too many ham radio videos to watch.
• Amplifying Your Adventures, Minimizing Your Power by noted YouTuber Tom Witherspoon, K4SWL. In his presentation, Tom concentrated on the personal and operating aspects of QRP, not the technical. The conclusion published in the proceedings does a good job of summarizing his talk. It reads, “Since my journey into ham radio began in 1997, I’ve encountered countless naysayers proclaiming, ‘That won’t work’ or ‘Life’s too short for QRP.’ These discouraging words often came from individuals who lacked firsthand experience in the field. Rather than accepting the pessimistic views, I’ve treated them as a checklist of challenges to overcome. my approach has been simple: get out there, experiment, and fully immerse myself in the moment. It’s through this hands-on exploration that I’ve discovered the true joy and potential of QRP operations.”
• Designing the Elecraft KH1: From Vision to Reality by Wayne Burdick, N6KR. Wayne certainly needs no introduction. His talk concentrated on how he made some of the decisions he made in designing the Elecraft KH1 hand-held HF transceiver. It was a great talk that gave quite a bit of insight into the design process. Personally, I’m not sold on the KH1, but Elecraft can’t make them fast enough, so I guess that tells you how valuable my opinion is.
• The Amazing Thermionic Valve by Greg Latta, AA8V. Greg is a professor emeritus of electrical engineering from Frostburg State University. He delved into some of the theory of how vacuum tubes work and some of the practical applications.
• Stealth Operation from Hotel Rooms and Other Unlikely QTHs by Ross Ballantyne, VK1UN.

Unfortunately, Ross was unable to present, either in person or via Zoom. According to the paper in the proceedings, Ross was part of several peace-keeping missions to remote spots around the world. On these trips, he operated from many hotel rooms and gained quite a bit of experience doing so. For example, he writes that virtually all of his antennas are made from wirewrap wire, which he gets from Ali Express. To couple the wire antenna to the transmitter, he uses a Z-match tuner or a modified Z-match tuner called the FRI match ATU. It’s a shame that Ross wasn’t able to adress us in person, as he sounds like quite an interesting fellow.

A walk with VU2ESE

After the talks, I decided to take a walk and stretch my legs. Just as I got to the street, I ran into a friend of mine, Arun, W8ARU, and Ashar, VU2ESE. We decided to walk together, and ended up walking about a mile and a half or so.

Arun and Farhan have been friends for many years. In fact, Arun hired Ashar to work for a company that Arun owned when he lived in India. (Arun now lives in Ann Arbor, MI, which is how I got to know him.) Arun once told me the taught Farhan how to solder. I confirmed that story at Hamvention last year when Ashar visited the ARDC booth.

In addition to all his development activities, Farhan recently joined the board of directors of Amateur Radio Digital Communications (ARDC), the private foundation that I retired from last May. We had a great chat about the future of ARDC and amateur radio in general, among other topics. It will be interesting to see in which direction the new board members take ARDC.

Vendor Night

Thursday evening, FDIM holds Vendor Night. It’s a great deal for vendors. There’s no charge to participate as a vendor, and it’s a lot of fun. A couple of years ago when I did Vendor Night, I also shared a booth with the Dayton Makerspace on Friday and Saturday at Hamvention and ended up selling more books in 2 hours at the FDIM Vendor Night than I did in 2 days of Hamvention.

This year, I sold about $150 worth of books. What was even better was meeting everyone, including those who have used my books to get licensed or to upgrade. For example, Tom, K4SWL, came over and shared his story with me.

He said that one year his wife said that she would also get her ticket as an anniversary present. He gave her my study guide and ten days later, she had her license. How cool is that?

Kudos to QRP ARCI for another successful FDIM. If you’d like to get a copy of this year’s proceedings, you can contact them by emailing toystore@qrparci.org or n8et@woh.rr.com. QRP ARCI also has some other goodies, if you’re interested, in their Toy Store.

To Hamvention and FDIM next year! God willing and the creek don't rise and I'm in good health and there are no family emergencies. I mentioned to Marianne that I'd like to go and that attending FDIM is on my bucket list and she had no problems.

May is always a busy month for us as both out birthdays are in May, Mother's Day is in May, but there are no more graduations to worry about missing ...........so hopefully it's a go for next year. I've been wanting to go for so long to actually meet some of the people I've talked to on the radio for years. So I will start saving my shekels now.

I got on the air for the Run For The Bacon last night. The K index was 2, and the solar flux was 200. According to the solar weather sites, that meant decent conditions, but I thought they were "meh" at best. Signals were so low on 20 Meters as to be deep in the noise and pretty much unintelligible. 40 Meters wasn't much better. I made three or four contacts and pulled the big switch. Maybe June will ne better.

The rest of the weekend was jam packed with house chores, so other than hunting a few POTA stations, there wasn't much on the air time. I spent a little time on Facebook, hoping to catch some big news from Hamvention, but it appears there wasn't any. Icom rolled out some circuit boards to keep everyone guessing about their next big deal, while Kenwood and Yaesu were silent.  Elecraft is still rolling in the wake of the KH1 introduction, so nothing new was expected from them.

I guess from a QRP standpoint the biggest news was QRP Labs QMX+. Attendance seemed to be good and the weather cooperated on Saturday, so I guess everyone is happy.

Outside, the weather was decent this weekend. That afforded me the chance to put the Hustler 2 Meter/440 antenna on the car that Joseph and Marianne gifted to me for my birthday. Wow! What a difference from the piece of (be nice, W2LJ!) that I had on there. The only drawback is that the radiator is 36" tall, so no more parking in the deck at work. I started parking in the regular lot this morning. Not a big deal when the weather is nice, right? But when the weather is nasty, it goes to show what Hams are willing to put up with for the sake of Amateur Radio.

72 de Larry W2LJ

QRP - When you care to send the very least!

Hamvention and more importantly, Four Days in May will be happening this weekend!

Oh how I wish that I could attend! I'm in a situation where I do not receive PTO - that is, if I'm not at work, I don't get paid.

Maybe, just maybe, next year, if God is willing and I can retire next May, I will finally be able to make it back to Hamvention after a 20 some year absence. In any case, to all of you who are going - safe travels, be well, have a good time and enjoy yourselves!

72 de Larry W2LJ

QRP - When you care to send the very least!