Remember yesterday when I mentioned the latest addition to my POTA setup, the Xiegu 5105 QRP rig….

Well this morning I decided to test it out and see how much work I would have to do with setting the parameters such as mic gain, processor, to make it sound like me… I was also testing out my EARCHI 9:1 unun with a 29.5 foot random wire to see how it would play with the built in AT of the 5105.

I figured I might as well do the testing at a POTA location just in case I was able to turn the test into an activation.

For this I chose Fort Frontenac POTA CA-5303. Its fairly easy to get there via the Kingston Transit system and its also close to downtown and all the amenities I might need. In the North East corner of the picture you will notice some white lines on the ground.

They are actually the walls of what’s left of that part of the Fort. Also the only parts of the Historic Site that is open to the public.

I leaned my MFJ 33 foot mast (supporting the 9:1 and wire in the vertical configuration) up against the tree.

And then ran the COAX over to the remains of the wall and set up my radio there and started operating.

My first contact was on 7.255 with the NCS of the ECARS net. He did hear me and considering I was QRP I was pleased. He did tell me that my audio seemed hot as if I was overdriving things. Lowering my voice seemed to help.

After that I looked at POTA Spots and managed to get W2IDG and VE3FI into the log from their parks and then finished up with the NCS of the MidCars net on 7.258.. All contacts were made on 40m SSB. I tried 20 SSB and was hearing lots of stations including a POTA Activation in VO1 but no luck breaking any of the pileups.

Then I figured it was time to get home and try to re configure the radio to my liking… I turned off the Speech Processor and lowered the Mic Gain from 60 to 40. Over the next few days I will get out again and see what else I have to do to get things sounding right.

Till then

73bob

Remember yesterday when I mentioned the latest addition to my POTA setup, the Xiegu 5105 QRP rig….

Well this morning I decided to test it out and see how much work I would have to do with setting the parameters such as mic gain, processor, to make it sound like me… I was also testing out my EARCHI 9:1 unun with a 29.5 foot random wire to see how it would play with the built in AT of the 5105.

I figured I might as well do the testing at a POTA location just in case I was able to turn the test into an activation.

For this I chose Fort Frontenac POTA CA-5303. Its fairly easy to get there via the Kingston Transit system and its also close to downtown and all the amenities I might need. In the North East corner of the picture you will notice some white lines on the ground.

They are actually the walls of what’s left of that part of the Fort. Also the only parts of the Historic Site that is open to the public.

I leaned my MFJ 33 foot mast (supporting the 9:1 and wire in the vertical configuration) up against the tree.

And then ran the COAX over to the remains of the wall and set up my radio there and started operating.

My first contact was on 7.255 with the NCS of the ECARS net. He did hear me and considering I was QRP I was pleased. He did tell me that my audio seemed hot as if I was overdriving things. Lowering my voice seemed to help.

After that I looked at POTA Spots and managed to get W2IDG and VE3FI into the log from their parks and then finished up with the NCS of the MidCars net on 7.258.. All contacts were made on 40m SSB. I tried 20 SSB and was hearing lots of stations including a POTA Activation in VO1 but no luck breaking any of the pileups.

Then I figured it was time to get home and try to re configure the radio to my liking… I turned off the Speech Processor and lowered the Mic Gain from 60 to 40. Over the next few days I will get out again and see what else I have to do to get things sounding right.

Till then

73bob

Due to some family stuff I have to give up on my attempts to reach the Bonus Station GB13COL in the 13 colonies event this year.

I did manage to get all 13 stations in the log along with the PA Bonus station and the French (TM13COL) bonus station. Most were SSB but I did get a few in the log using CW.

I did hear GB13COL on SSB and CW but had no luck breaking the pileups in either mode.

The people who could not understand the concept of “Split” added to the problems and the DX Cops trying to get their point across by adding to the QRM with the words “UP UP” over and over.

That really did not help my popgun station hear what I was trying to listen for.

So with 90 minutes left to go…. Its time to cut my losses and run….but for the most part if was fun. Thanks for a job well do goes out the the Event Organisers along with the station operators of the stations involved in the event.

Happy 4th and lets try again next year….

73bob

Due to some family stuff I have to give up on my attempts to reach the Bonus Station GB13COL in the 13 colonies event this year.

I did manage to get all 13 stations in the log along with the PA Bonus station and the French (TM13COL) bonus station. Most were SSB but I did get a few in the log using CW.

I did hear GB13COL on SSB and CW but had no luck breaking the pileups in either mode.

The people who could not understand the concept of “Split” added to the problems and the DX Cops trying to get their point across by adding to the QRM with the words “UP UP” over and over.

That really did not help my popgun station hear what I was trying to listen for.

So with 90 minutes left to go…. Its time to cut my losses and run….but for the most part if was fun. Thanks for a job well do goes out the the Event Organisers along with the station operators of the stations involved in the event.

Happy 4th and lets try again next year….

73bob

Traditionally held on “The Last Rainy Weekend” in June but for the sticklers for the rules its actual date is the 4th weekend in June…

This year it would be on June 22nd and ending on June 23rd

So what will VA3QV be doing???? Its safe to say that my Field Day Station will look a bit like this:

or like this from back in 2017….

So I plan to be operating as a 1B Battery Station from the RAC Ontario East Section (ONE)

The actual location has not been determined yet but there is a good chance the location could be one of the Parks on the Air location in the City of Kingston.

That’s the plan for good weather… and so far the long range forecast is calling for nice (dry). If the weather is not dry then the plan is to operate as a home station in the 1D catagory just to give out points to the participants

If you are new at this then the rules can be found here:

Years ago Field Day was considered a test of our emergency operating skills specifically to set up and operate a station for 24 hours and somehow it has morphed into more of contest with groups of operators putting up equipment that would not be used in a real emergency at power levels that could not be maintained unless you had a generator and an endless supply of gasoline.

I’m a little more primitive by setting up my QRP (5w of power) radio with a wire antenna and using a solar panel to top up the battery as needed.

I will have the option of being under cover (see above pic) as protection from the sun and/or rain most likely be needed at some time . Not sure how long I will be operating but it won’t be for the full 24 hours.

Overnight all I would be doing is listening to static and feeding the mosquitoes…

No egos to stroke…. Just operate and make some contacts with the emphasis of having fun and not taking myself too seriously.

Hope to hear you and be heard by you during the event

73bob

Anyone who has been with me for awhile knows that every now and again “Murphy” of Murphy’s Law fame comes for a visit.

Things here have been going fairly well (Ham Radio wise) recently. I have been able to some contacts (mostly 20m SSB) during the daytime and also in the evenings (mostly 40m SSB) and considering the band conditions I think that’s pretty good.

But (and you know there had to be a “but”!

After making some evening 40m ssb contacts last night I shut off the power supply and left the shack. I came back to the shack and turned on the power supply and the radio would not turn on.

I did a quick check and the power supply now had an output of 4v dc. Not what I was expecting as before I shut it down it was steady at 13.5v dc which is normal for this unit.

I then took the cover off and could not smell the “magic smoke” and there was no visible issues on the board itself. No burn marks on the board, everything attached and no signs of any thing out of the ordinary.

I did have a backup PS so I’m still on the air with a 25 amp unit rather than the 30 amp unit that now is a paperweight.

The replacement from “The Toronto Toystore” will set me back around $220.00 after shipping/taxes, so it won’t break the bank and they have one in stock so “fingers crossed”.

So, this morning I look out into my backyard and notice the counterweight attached to the end of my “Stealthy Inverted L” is laying on the ground. A quick check found that the wire itself was intact but…. (yup but again) the wire had slipped off on of the branches that support the horizontal section of the wire. This does happen every now and again so…. 30 minutes later I’m back on the air.

The plan now is to see if the band comes to life (the numbers are looking good) and I can get (more than) a few contacts in the log.

.

Ending on a positive note I was able to contact VE3FI Bill as he activated POTA CA-2376 as part of his cross Canada tour. I guess the antenna is working after all that.

73bob

Anyone who has been with me for awhile knows that every now and again “Murphy” of Murphy’s Law fame comes for a visit.

Things here have been going fairly well (Ham Radio wise) recently. I have been able to some contacts (mostly 20m SSB) during the daytime and also in the evenings (mostly 40m SSB) and considering the band conditions I think that’s pretty good.

But (and you know there had to be a “but”!

After making some evening 40m ssb contacts last night I shut off the power supply and left the shack. I came back to the shack and turned on the power supply and the radio would not turn on.

I did a quick check and the power supply now had an output of 4v dc. Not what I was expecting as before I shut it down it was steady at 13.5v dc which is normal for this unit.

I then took the cover off and could not smell the “magic smoke” and there was no visible issues on the board itself. No burn marks on the board, everything attached and no signs of any thing out of the ordinary.

I did have a backup PS so I’m still on the air with a 25 amp unit rather than the 30 amp unit that now is a paperweight.

The replacement from “The Toronto Toystore” will set me back around $220.00 after shipping/taxes, so it won’t break the bank and they have one in stock so “fingers crossed”.

So, this morning I look out into my backyard and notice the counterweight attached to the end of my “Stealthy Inverted L” is laying on the ground. A quick check found that the wire itself was intact but…. (yup but again) the wire had slipped off on of the branches that support the horizontal section of the wire. This does happen every now and again so…. 30 minutes later I’m back on the air.

The plan now is to see if the band comes to life (the numbers are looking good) and I can get (more than) a few contacts in the log.

.

Ending on a positive note I was able to contact VE3FI Bill as he activated POTA CA-2376 as part of his cross Canada tour. I guess the antenna is working after all that.

73bob