This weekend is the ARRL June VHF contest. Its a fun way to test our your VHF Capabilities and your antenna systems…

The following is a “cut N paste” from the ARRL Website:

---

About

Contest Objective: For amateurs in the US and Canada (and their possessions) to work as many amateur stations in as many different 2 degrees x 1 degree Maidenhead grid squares as possible using authorized frequencies above 50 MHz. Stations outside the US & Canada (and their possessions) may only work stations in the US (and its possessions) and Canada.

Dates: The second full weekend in June. (June 8-10, 2024)

Contest Period: Begins 1800 UTC Saturday, ends 0259 UTC Monday.

---

Now this is a busy weekend for me (radio wise) as the Rideau Lakes Cycle Tour will be in Kingston during that time and its the only scheduled Public Service Event that our local group does every year.The picture on the left was taken the first year I assisted the Kingston Group on the event. Previous to that I lived in Ottawa and I participated with the Ottawa Group on the same event.

But lets get back to the contest for a bit:

First of all…. Head over to the ARRL website for the latest update and the full rules for the Contest.

Click on the ARRL logo below for the Rules PDF

Using my Yaesu FT991a I plan to be giving out the “Rare FN14” Grid square on both 2m and 6m SSB.

On Saturday my Bike tour shift will finish around 6pm (EDST) or 2200 (UTC) if I did the conversion correctly… So I plan to operate from 2300 UTC for a couple of hours.

On Sunday my tour will finish around 9am (EDST) or 1300 (UTC) once again if the conversion works and will try again then around 1400 UTC once I get home.

My 2m/70cm antenna will be a simple Halo or loop which will be horizontal at approx 20 feet above ground. The 991a has an output of 50w ssb on 2m. As the loop is “sort of” useable on 70cm I will be able to give some locals an extra multi.

My 6m antenna will be a simple “Buddipole 6m Dipole. The 991a has an output of 100w ssb so it should be able to get a bit of a signal out across the Lake (at least I hope it will).

Later tonight there is a vhf net that starts on 144.250 usb that is based in Eastern Ontario. Check out the West Carleton Amateur Radio Club for more into on that. After that they call the role on 70cm and 6m. I stand a change on 6m and 2m if someone has their beams aimed southwest. More on how this works later.

Lets see who can hear the “Popgun” with the tiny antennas…

73bob

This weekend is the ARRL June VHF contest. Its a fun way to test our your VHF Capabilities and your antenna systems…

The following is a “cut N paste” from the ARRL Website:

---

About

Contest Objective: For amateurs in the US and Canada (and their possessions) to work as many amateur stations in as many different 2 degrees x 1 degree Maidenhead grid squares as possible using authorized frequencies above 50 MHz. Stations outside the US & Canada (and their possessions) may only work stations in the US (and its possessions) and Canada.

Dates: The second full weekend in June. (June 8-10, 2024)

Contest Period: Begins 1800 UTC Saturday, ends 0259 UTC Monday.

---

Now this is a busy weekend for me (radio wise) as the Rideau Lakes Cycle Tour will be in Kingston during that time and its the only scheduled Public Service Event that our local group does every year.The picture on the left was taken the first year I assisted the Kingston Group on the event. Previous to that I lived in Ottawa and I participated with the Ottawa Group on the same event.

But lets get back to the contest for a bit:

First of all…. Head over to the ARRL website for the latest update and the full rules for the Contest.

Click on the ARRL logo below for the Rules PDF

Using my Yaesu FT991a I plan to be giving out the “Rare FN14” Grid square on both 2m and 6m SSB.

On Saturday my Bike tour shift will finish around 6pm (EDST) or 2200 (UTC) if I did the conversion correctly… So I plan to operate from 2300 UTC for a couple of hours.

On Sunday my tour will finish around 9am (EDST) or 1300 (UTC) once again if the conversion works and will try again then around 1400 UTC once I get home.

My 2m/70cm antenna will be a simple Halo or loop which will be horizontal at approx 20 feet above ground. The 991a has an output of 50w ssb on 2m. As the loop is “sort of” useable on 70cm I will be able to give some locals an extra multi.

My 6m antenna will be a simple “Buddipole 6m Dipole. The 991a has an output of 100w ssb so it should be able to get a bit of a signal out across the Lake (at least I hope it will).

Later tonight there is a vhf net that starts on 144.250 usb that is based in Eastern Ontario. Check out the West Carleton Amateur Radio Club for more into on that. After that they call the role on 70cm and 6m. I stand a change on 6m and 2m if someone has their beams aimed southwest. More on how this works later.

Lets see who can hear the “Popgun” with the tiny antennas…

73bob