Over on the YouTube channel "SecPGH" a talk by Grey Fox titled "Introduction to Software Defined Radio For Offensive and Defensive Operations" has been uploaded from the BSidesPGH 2024 conference. BSidesPGH 2024 was a security conference held in Pittsburgh, PA, USA on July 25.

The talks are generally about network security, however, Fox's talk is all about RF security topics and software defined radio. In the talk, he introduces SDR, and devices like the Flipper Zero and demonstrates various basic examples such as receiving FM from a handheld radio and ADS-B.

Next, he goes on to demonstrate security topics such as showing how to capture and analyze signals from a 433 MHz security alarm using an RTL-SDR and Flipper Zero, and how to jam frequencies and replay captured signals. Finally, he demonstrates WiFi cracking with the help of Kali Linux and Flipper Zero with WiFi dev board attached.

Over on hackster.io we've seen a story about how maker Jon Dawson designed a self-contained software-defined radio based on the Raspberry Pi Pico that can receive 0 - 30 MHz, with up to 250 kHz of bandwidth. The Raspberry Pi Pico is a microcontroller board based on the Raspberry Pi Foundation's own RP2040 chip.

The Pi Pico Rx's front end consists of a Tayloe Quadrature Sampling Detector (QSD) mixer which makes use of the PIO (Programmable Input/Output) feature on the RP2040. The circuit also has an encoder knob for tuning and a small OLED screen.

Jon had originally created the Pi Pico Rx on a custom PCB, however, his latest work brings the cost down by showing that it can just as easily be implemented on a breadboard with through-hole components.

The full writeup can be found on Jon's blog "101 Things", as can the open source firmware. He has also uploaded a YouTube video explaining and demonstrating the project which we've embedded below.

Turn your laptop into an SDR radio with a RTL SDR Dongle Kit for under $45.