❌

Normal view

There are new articles available, click to refresh the page.
Before yesterdayMain stream

Project TouCans Lab Notebook: Getting Rid of the Noise

Β I finally landed at a quiet tape vs. noiseΒ Β configuration for TouCans on Saturday afternoon. Here’s how.


In the picture above, the wires circled in green include the + and - power wire, (white and red respectively), and the keyer wire, (also red.) When I taped the bundle of wires including the single turn coil shown in the white wire to the side of the can, the noise from the power supply went away. I was left with only noise from the radio, (the kind I want), and a gentle hum from the power supply because it had switched into buck converter mode to step its voltage up to the required 15V! The helicoptering from the Pico-W was also almost gone.

In other parts of the project, the Pico-W has started burning through pairs of AA batteries rather quickly.

Charging the Yaesu FT-5D with USB-C

By: DL6JOE
18 June 2024 at 07:42

The Yaesu FT-5D is an expensive HRT. It comes with many nice features like APRS and C4FM.

You can charge it with the Rapid Desk Charger* or with the power adapter and Cable**. There is no other charging option.Β 

Bad if you are outside during a POTA activation.

I have found a USB-C to DC 12 V Adapter that works great for me. So I can charge the FT-5D with a PD USB Powerbank or car adapter.

There is another option from W0AEZ. A big 5 Ah battery for the FT-5D. It extends the running time by three times, but you need a packing mule πŸ˜‰

Here are the links to this useful stuff:

USB-C to DC 12 V Adapter on Amazon***

USB-C to DC 12 V Adapter on AliExpress***

Big 5 Ah battery for FT-5D

* What the heck is meaning of fast, Yaesu?
** Slower than the Rapid Desk Charger
*** Affiliate Links

❌
❌