About UV-K5 CEC Firmware Version 0.1X (from v0.1p)

1.About Version 0.1X

This version is the stable version of UV-K5 Version 0.1P

In Version 0.1P, many things were changed, including the internal variable structure, and we received feedback for about 8 days to check if there were any problems. The original plan was to just change the name from Version 0.1P to Version 0.1X, but several features were added as follows. Please read Version 0.1P for main features

2.SSB Filter (bandwidth)

  The filter can select one of these : VFO, 3K, 2K, 1.7K, 3K+, 2K+,1.7K+  

  This filter operates only in SSB mode and is disabled in existing FM mode.  If you select a filter with +, the + mode is also applied to CW mode

  VFO : Previous firmware state. It is selected among WIDE/NARROW selected in VFO

 3K ~ 1.7K : When actually measured, it is a little wider than stated.

3K+ ~ 1.7K+ : It improves the functionality of the existing filter. Based on SINAD, there is an improvement effect of about 1dB.

3.SSTV 

3.1 Scottie 1 Mode 

Scottie1 mode was added to the existing Martin1 mode. You can select it from STVEnc in the settings menu.

3.3 QSO TX Number

  SSTV transmission sequence record. It is displayed at the top right when transmitting SSTV.

3.4 SSTV transmission resolution has been increased. If this causes problems, I plan to reduce the resolution again.

X-TAL is not connected to the MCU (CPU) used in UV-K5. (Internal LC res) So, there is a slight problem during precise transmission like SSTV.

4. Download 

https://github.com/phdlee/uvk5cec/releases/tag/v_0.1x