❌

Reading view

There are new articles available, click to refresh the page.

What was old is new again

People who know me have heard me say that after all these years there are 3 radios I have sold that I actually regret selling. Well now there are only 2 radios that I regret selling…

.

Welcome the Xiegu X5105 back into my portable shack…

.

Between my FT991a and my FT891 there was a bit of a gap. The Yeasu FT891 Portable Station was a bit too heavy for my old bones. I needed something in a lighter backpack to make it easier to carry if I was to choose to activate one of the local POTA Parks here in Kingston.

The above pic shows my old X5105 with the Bandspringer attached

The Xiegu X5105 fills that gap. With the built in battery pack, the built in automatic antenna tuner along with the contest keyer and the built in CW Decoder it makes it a dream portable station.

My antennas are a 40m EFHW made with 28ga wire and a QRP AMAZON 49:1 unun. I also can use a 29foot end fed random wire using a QRP EARCHI 9:1 unun.

I also have the SOTABeams Bandspringer antenna that plugs right into the antenna input and uses the built in tuner to operate between 10m and 60m.

So what’s the other two radios you might ask?

Above is my first QRP setup. FT817, LDG QRP Autotuner.

If I could work a deal for a Yaesu FT817 and a Flex 1500 it would complete the list. However used rigs are pricy and it seems most hams think that radios seem to appreciate with age so like I mentioned above it has to be a good deal for both the seller and myself.

73bob

What was old is new again

People who know me have heard me say that after all these years there are 3 radios I have sold that I actually regret selling. Well now there are only 2 radios that I regret selling…

.

Welcome the Xiegu X5105 back into my portable shack…

.

Between my FT991a and my FT891 there was a bit of a gap. The Yeasu FT891 Portable Station was a bit too heavy for my old bones. I needed something in a lighter backpack to make it easier to carry if I was to choose to activate one of the local POTA Parks here in Kingston.

The above pic shows my old X5105 with the Bandspringer attached

The Xiegu X5105 fills that gap. With the built in battery pack, the built in automatic antenna tuner along with the contest keyer and the built in CW Decoder it makes it a dream portable station.

My antennas are a 40m EFHW made with 28ga wire and a QRP AMAZON 49:1 unun. I also can use a 29foot end fed random wire using a QRP EARCHI 9:1 unun.

I also have the SOTABeams Bandspringer antenna that plugs right into the antenna input and uses the built in tuner to operate between 10m and 60m.

So what’s the other two radios you might ask?

Above is my first QRP setup. FT817, LDG QRP Autotuner.

If I could work a deal for a Yaesu FT817 and a Flex 1500 it would complete the list. However used rigs are pricy and it seems most hams think that radios seem to appreciate with age so like I mentioned above it has to be a good deal for both the seller and myself.

73bob

Testing out a β€œNewly built” antenna

Last night around 9pm I was browsing Amazon and found the same 64:1 unun that I use with my 40m EFHW. This antenna is my primary antenna for my β€œTransportable/POTA” setup with my FT891.

I decided that the last one worked so well for me that it was time to see if the 1st one was the real deal or a fluke.

Around noon today I checked my front door and found the Amazon Fairy had magically made the new 64:1 unun appear sometime between 10am (last time I checked for it) and noon.

I had a spare 100 foot roll of Princess Auto 18ga insulated wire in the shack and as a bonus for my home environment is was even green.

I quickly measured out 64 feet and then did the connection things. As with most of Eastern North America it was a rather wet day.

Around 4pm locally the rain stopped and I was able to remove the old wire and install the new antenna, once again using the fir trees on the edge of my yard for camo as not draw attention to the antenna.

The SWR is pretty good especially for a wire hidden in the branches:

6m – 2.5:1, 10m – 1.7:1, 12m- 1.2:2, 15m – 1.6:1

20m – 2.0:1, 40m – 1.3:1, 80m – 3.0:1

The bands are not the best, but signal reports (90w output pwr) were fairly well (S7-S9+) with the stations that I was able to contact.

All in all for what it is…. I’m impressed and the best part is that using the built in auto tuner on my Yaesu FT991a I can easily bring it down to 1:1 on all the bands listed above.

The results are the same on my Yaesu FT891 with the same style of balun and a 64 foot length of quality (Red) Princess Auto 18 ga automotive wire. The only real difference is that as I use the 891 with no tuner I have to be careful on some of the bands.

As the new install gets more use I will let you know if there are any β€œissues” with its performance.

73bob

Testing out a β€œNewly built” antenna

Last night around 9pm I was browsing Amazon and found the same 64:1 unun that I use with my 40m EFHW. This antenna is my primary antenna for my β€œTransportable/POTA” setup with my FT891.

I decided that the last one worked so well for me that it was time to see if the 1st one was the real deal or a fluke.

Around noon today I checked my front door and found the Amazon Fairy had magically made the new 64:1 unun appear sometime between 10am (last time I checked for it) and noon.

I had a spare 100 foot roll of Princess Auto 18ga insulated wire in the shack and as a bonus for my home environment is was even green.

I quickly measured out 64 feet and then did the connection things. As with most of Eastern North America it was a rather wet day.

Around 4pm locally the rain stopped and I was able to remove the old wire and install the new antenna, once again using the fir trees on the edge of my yard for camo as not draw attention to the antenna.

The SWR is pretty good especially for a wire hidden in the branches:

6m – 2.5:1, 10m – 1.7:1, 12m- 1.2:2, 15m – 1.6:1

20m – 2.0:1, 40m – 1.3:1, 80m – 3.0:1

The bands are not the best, but signal reports (90w output pwr) were fairly well (S7-S9+) with the stations that I was able to contact.

All in all for what it is…. I’m impressed and the best part is that using the built in auto tuner on my Yaesu FT991a I can easily bring it down to 1:1 on all the bands listed above.

The results are the same on my Yaesu FT891 with the same style of balun and a 64 foot length of quality (Red) Princess Auto 18 ga automotive wire. The only real difference is that as I use the 891 with no tuner I have to be careful on some of the bands.

As the new install gets more use I will let you know if there are any β€œissues” with its performance.

73bob

❌