I attended last years event and got some good deals but this year I will be in Ottawa and will miss it.

If you can… drop in for a visit.

73bob

I attended last years event and got some good deals but this year I will be in Ottawa and will miss it.

If you can… drop in for a visit.

73bob

Remember yesterday when I mentioned the latest addition to my POTA setup, the Xiegu 5105 QRP rig….

Well this morning I decided to test it out and see how much work I would have to do with setting the parameters such as mic gain, processor, to make it sound like me… I was also testing out my EARCHI 9:1 unun with a 29.5 foot random wire to see how it would play with the built in AT of the 5105.

I figured I might as well do the testing at a POTA location just in case I was able to turn the test into an activation.

For this I chose Fort Frontenac POTA CA-5303. Its fairly easy to get there via the Kingston Transit system and its also close to downtown and all the amenities I might need. In the North East corner of the picture you will notice some white lines on the ground.

They are actually the walls of what’s left of that part of the Fort. Also the only parts of the Historic Site that is open to the public.

I leaned my MFJ 33 foot mast (supporting the 9:1 and wire in the vertical configuration) up against the tree.

And then ran the COAX over to the remains of the wall and set up my radio there and started operating.

My first contact was on 7.255 with the NCS of the ECARS net. He did hear me and considering I was QRP I was pleased. He did tell me that my audio seemed hot as if I was overdriving things. Lowering my voice seemed to help.

After that I looked at POTA Spots and managed to get W2IDG and VE3FI into the log from their parks and then finished up with the NCS of the MidCars net on 7.258.. All contacts were made on 40m SSB. I tried 20 SSB and was hearing lots of stations including a POTA Activation in VO1 but no luck breaking any of the pileups.

Then I figured it was time to get home and try to re configure the radio to my liking… I turned off the Speech Processor and lowered the Mic Gain from 60 to 40. Over the next few days I will get out again and see what else I have to do to get things sounding right.

Till then

73bob

Remember yesterday when I mentioned the latest addition to my POTA setup, the Xiegu 5105 QRP rig….

Well this morning I decided to test it out and see how much work I would have to do with setting the parameters such as mic gain, processor, to make it sound like me… I was also testing out my EARCHI 9:1 unun with a 29.5 foot random wire to see how it would play with the built in AT of the 5105.

I figured I might as well do the testing at a POTA location just in case I was able to turn the test into an activation.

For this I chose Fort Frontenac POTA CA-5303. Its fairly easy to get there via the Kingston Transit system and its also close to downtown and all the amenities I might need. In the North East corner of the picture you will notice some white lines on the ground.

They are actually the walls of what’s left of that part of the Fort. Also the only parts of the Historic Site that is open to the public.

I leaned my MFJ 33 foot mast (supporting the 9:1 and wire in the vertical configuration) up against the tree.

And then ran the COAX over to the remains of the wall and set up my radio there and started operating.

My first contact was on 7.255 with the NCS of the ECARS net. He did hear me and considering I was QRP I was pleased. He did tell me that my audio seemed hot as if I was overdriving things. Lowering my voice seemed to help.

After that I looked at POTA Spots and managed to get W2IDG and VE3FI into the log from their parks and then finished up with the NCS of the MidCars net on 7.258.. All contacts were made on 40m SSB. I tried 20 SSB and was hearing lots of stations including a POTA Activation in VO1 but no luck breaking any of the pileups.

Then I figured it was time to get home and try to re configure the radio to my liking… I turned off the Speech Processor and lowered the Mic Gain from 60 to 40. Over the next few days I will get out again and see what else I have to do to get things sounding right.

Till then

73bob

This weekend is the ARRL June VHF contest. Its a fun way to test our your VHF Capabilities and your antenna systems…

The following is a “cut N paste” from the ARRL Website:

---

About

Contest Objective: For amateurs in the US and Canada (and their possessions) to work as many amateur stations in as many different 2 degrees x 1 degree Maidenhead grid squares as possible using authorized frequencies above 50 MHz. Stations outside the US & Canada (and their possessions) may only work stations in the US (and its possessions) and Canada.

Dates: The second full weekend in June. (June 8-10, 2024)

Contest Period: Begins 1800 UTC Saturday, ends 0259 UTC Monday.

---

Now this is a busy weekend for me (radio wise) as the Rideau Lakes Cycle Tour will be in Kingston during that time and its the only scheduled Public Service Event that our local group does every year.The picture on the left was taken the first year I assisted the Kingston Group on the event. Previous to that I lived in Ottawa and I participated with the Ottawa Group on the same event.

But lets get back to the contest for a bit:

First of all…. Head over to the ARRL website for the latest update and the full rules for the Contest.

Click on the ARRL logo below for the Rules PDF

Using my Yaesu FT991a I plan to be giving out the “Rare FN14” Grid square on both 2m and 6m SSB.

On Saturday my Bike tour shift will finish around 6pm (EDST) or 2200 (UTC) if I did the conversion correctly… So I plan to operate from 2300 UTC for a couple of hours.

On Sunday my tour will finish around 9am (EDST) or 1300 (UTC) once again if the conversion works and will try again then around 1400 UTC once I get home.

My 2m/70cm antenna will be a simple Halo or loop which will be horizontal at approx 20 feet above ground. The 991a has an output of 50w ssb on 2m. As the loop is “sort of” useable on 70cm I will be able to give some locals an extra multi.

My 6m antenna will be a simple “Buddipole 6m Dipole. The 991a has an output of 100w ssb so it should be able to get a bit of a signal out across the Lake (at least I hope it will).

Later tonight there is a vhf net that starts on 144.250 usb that is based in Eastern Ontario. Check out the West Carleton Amateur Radio Club for more into on that. After that they call the role on 70cm and 6m. I stand a change on 6m and 2m if someone has their beams aimed southwest. More on how this works later.

Lets see who can hear the “Popgun” with the tiny antennas…

73bob