This event happens seasonally, on the 3rd full weekend of the month (Saturday & Sunday UTC). These are ‘activity weekends’ where the main purpose is to get out in the parks, and have as much fun as possible.
Winter – 3rd Full Weekend of January. January 18-19, 2025
Spring – 3rd Full Weekend of April. April 19-20, 2025
Summer – 3rd Full Weekend of July. July 19-20, 2025
Autumn – 3rd Full Weekend of October. October 19-20, 2024
Hope to get you in my Logs during the upcoming event….
This event happens seasonally, on the 3rd full weekend of the month (Saturday & Sunday UTC). These are ‘activity weekends’ where the main purpose is to get out in the parks, and have as much fun as possible.
Winter – 3rd Full Weekend of January. January 18-19, 2025
Spring – 3rd Full Weekend of April. April 19-20, 2025
Summer – 3rd Full Weekend of July. July 19-20, 2025
Autumn – 3rd Full Weekend of October. October 19-20, 2024
Hope to get you in my Logs during the upcoming event….
It was a great time being back in Ottawa, visiting with friends from my old neighborhood and also spoiling my Daughters two cats.
However on the “Radio side” of things …. not so good
The plans were that I would be able (weather permitting) continue to control my hour on the Trans Provincial Net while away. It seemed that “Mother Nature” had different ideas. Most days rain or the threat of rain kept me from heading over to the park.
Above pic showing where the park was and the route I took
As I mentioned in a previous post…. there was a local (non-POTA) park within walking distance to operate from. It was a local sports field and had some bleachers for when the crowds came for Junior Soccer/Football and or Rugby…
Below pic showing how I set up at the park
Although the operating position was excellent there was NO PROTECTION from the elements which in my case meant rain.
I was able to wrap my MFJ mast to one of the bleachers and stretch the end of the EFHW antenna to the other bleacher and it did work like a charm. Signal reports were great considering I was running 50w into the antenna
So for 1 out of a potential 5 operating days it was fun and dry. Walking home with the gear safely packed in the backpack “Mother Nature” paid a short visit.
I also managed to activate CA1515 and CA1516 using my Xiegu X5105 along with a 29 foot wire (supported by the same mast mentioned earlier) with a 9:1 unun, a 17 foot counterpoise with a choke on the radio end of the coax. Jose VA3PCJ was nice enough to offer me a ride there and back. I activated the parks using SSB and VA3PCJ activated the same parks using CW and his KX3.
For Jose’s version of the park activation click HERE
I am expecting to be returning to Ottawa in Mid-January 2025 for another visit with my GrandKits and like last years winter visit there will be a car to keep me warm and dry.
It was a great time being back in Ottawa, visiting with friends from my old neighborhood and also spoiling my Daughters two cats.
However on the “Radio side” of things …. not so good
The plans were that I would be able (weather permitting) continue to control my hour on the Trans Provincial Net while away. It seemed that “Mother Nature” had different ideas. Most days rain or the threat of rain kept me from heading over to the park.
Above pic showing where the park was and the route I took
As I mentioned in a previous post…. there was a local (non-POTA) park within walking distance to operate from. It was a local sports field and had some bleachers for when the crowds came for Junior Soccer/Football and or Rugby…
Below pic showing how I set up at the park
Although the operating position was excellent there was NO PROTECTION from the elements which in my case meant rain.
I was able to wrap my MFJ mast to one of the bleachers and stretch the end of the EFHW antenna to the other bleacher and it did work like a charm. Signal reports were great considering I was running 50w into the antenna
So for 1 out of a potential 5 operating days it was fun and dry. Walking home with the gear safely packed in the backpack “Mother Nature” paid a short visit.
I also managed to activate CA1515 and CA1516 using my Xiegu X5105 along with a 29 foot wire (supported by the same mast mentioned earlier) with a 9:1 unun, a 17 foot counterpoise with a choke on the radio end of the coax. Jose VA3PCJ was nice enough to offer me a ride there and back. I activated the parks using SSB and VA3PCJ activated the same parks using CW and his KX3.
For Jose’s version of the park activation click HERE
I am expecting to be returning to Ottawa in Mid-January 2025 for another visit with my GrandKits and like last years winter visit there will be a car to keep me warm and dry.
Its another gig sitting my “Grand Kittens” for my daughter as she and her hubby will be out of town from September 20th for a week. I guess I did a good job when they went to Cuba last January so I got invited back…I will be operating /p from Ottawa from September 21st to September 27th.
Most of my operating will be from September 23rd onwards.
As you can see from the above pic… they like having me around (one cat at least)
This time its a bit different because the car will be going with them to their rental cottage which is about 2 hours north of Ottawa.
However I plan to take both my Portable Station and my Transportable Station with me so I can activate some POTA locations with the Xiegu X5105 and also use my Yaesu FT 891 as I control the Trans Provincial Net for my 11am slot.
Before we go any further please remember that all my RF Plans you will see below are if the weather is good. I don’t like operating outside in the rain and neither do my radios….
The closest park to where they live is a City Park and not a POTA park.
The park has two sport fields and they have bleachers so it will be easy as I will have somewhere to sit along with strap my MFJ 33 foot mast to so the EFHW will have some altitude.
That will allow me to act as NCS with a 100w station with a full size antenna.
Once the net is over I will be packing up and heading back to the apartment for lunch. In the afternoons…. Once again if the weather is cooperating I plan to take the X5105 out to one or two of the local POTA Parks for a couple of hours. Check POTA Spots….
Due to the fact of not having access to a vehicle I will be heading out either on foot or public transport. After checking the POTA map it seems there are quite a few POTA sites that are fairly easy to access via the Bus and LRT service. However a few of the “Locals” have mentioned that they might pick me up and we could do an activation as a group so you never know.
They say that “getting there is half the fun” and this might be the case.
Stay tuned…
73bob
Yes its an old picture but the hobby has been fun since the 1990’s
Its another gig sitting my “Grand Kittens” for my daughter as she and her hubby will be out of town from September 20th for a week. I guess I did a good job when they went to Cuba last January so I got invited back…I will be operating /p from Ottawa from September 21st to September 27th.
Most of my operating will be from September 23rd onwards.
As you can see from the above pic… they like having me around (one cat at least)
This time its a bit different because the car will be going with them to their rental cottage which is about 2 hours north of Ottawa.
However I plan to take both my Portable Station and my Transportable Station with me so I can activate some POTA locations with the Xiegu X5105 and also use my Yaesu FT 891 as I control the Trans Provincial Net for my 11am slot.
Before we go any further please remember that all my RF Plans you will see below are if the weather is good. I don’t like operating outside in the rain and neither do my radios….
The closest park to where they live is a City Park and not a POTA park.
The park has two sport fields and they have bleachers so it will be easy as I will have somewhere to sit along with strap my MFJ 33 foot mast to so the EFHW will have some altitude.
That will allow me to act as NCS with a 100w station with a full size antenna.
Once the net is over I will be packing up and heading back to the apartment for lunch. In the afternoons…. Once again if the weather is cooperating I plan to take the X5105 out to one or two of the local POTA Parks for a couple of hours. Check POTA Spots….
Due to the fact of not having access to a vehicle I will be heading out either on foot or public transport. After checking the POTA map it seems there are quite a few POTA sites that are fairly easy to access via the Bus and LRT service. However a few of the “Locals” have mentioned that they might pick me up and we could do an activation as a group so you never know.
They say that “getting there is half the fun” and this might be the case.
Stay tuned…
73bob
Yes its an old picture but the hobby has been fun since the 1990’s
Mike K8MRD from Ham Radio Tube just posted this video on You Tube and if you own a Xiegu X5105 you gotta give this a try. I will be looking for the the MFJ Antennas he mentioned at any hamfests I get to.
Mike K8MRD from Ham Radio Tube just posted this video on You Tube and if you own a Xiegu X5105 you gotta give this a try. I will be looking for the the MFJ Antennas he mentioned at any hamfests I get to.
Just give it a good look over…. They did the work so it seems only fair that you read up on it from their site…
Now here are some of my early comments….
From what I have read (and the way I see it) the new Yaesu FTX1F will be in direct competition with the Elecraft KX3 along with the Icom IC705.
I’m guessing that it will also be close in price with Icom and Elecraft.
However that expected price point will keep it out of my backpack. Although I am a BIG FAN of the Yaesu brand. I have 3 (FT991a, FT891 and FT2dr) of them in the shack right now.
I just can’t justify any radio costing approx $2000.00 CDN going out with me into the field where it can easily get damaged.
If (when)I buy one it will be sitting on my desk beside the Yaesu FT991a that is working great for me.
I have very well used Xiegu X5105 that works well for me in the field. If it was to fall off the picnic table or get damaged in any other way I will be out about 25% of the expected price of the FTx1F.
Guessing that there will be more info coming out in time for the Hamcation in Florida along with Hamvention in May.
I’m looking forward to seeing a North American Price…
Then all I have to do is convince Liz we need one.
Just give it a good look over…. They did the work so it seems only fair that you read up on it from their site…
Now here are some of my early comments….
From what I have read (and the way I see it) the new Yaesu FTX1F will be in direct competition with the Elecraft KX3 along with the Icom IC705.
I’m guessing that it will also be close in price with Icom and Elecraft.
However that expected price point will keep it out of my backpack. Although I am a BIG FAN of the Yaesu brand. I have 3 (FT991a, FT891 and FT2dr) of them in the shack right now.
I just can’t justify any radio costing approx $2000.00 CDN going out with me into the field where it can easily get damaged.
If (when)I buy one it will be sitting on my desk beside the Yaesu FT991a that is working great for me.
I have very well used Xiegu X5105 that works well for me in the field. If it was to fall off the picnic table or get damaged in any other way I will be out about 25% of the expected price of the FTx1F.
Guessing that there will be more info coming out in time for the Hamcation in Florida along with Hamvention in May.
I’m looking forward to seeing a North American Price…
Then all I have to do is convince Liz we need one.
Once again let me take you back in time where on June 1st and 2nd I had operated the SS Keewatin in the Museum Ships on the air event.
And if you look at the below PIC its quite clear that the Ship is in the dry dock
So now fast forward to today and I get notified that the Kingston Dry Dock is a National Historic Site and had been accepted as a Parks on the Air (POTA) location.
I quickly uploaded my logs for the Museum Event to POTA and now it seems that I was the first activation for the site (All Time New One)
Over the last few years I have hunted a few ATNO locations but in my feeble attempts of activating Parks this will most likely be my first (and only) activation of an ATNO….
So…. Thanks to all the hunters…..
73bob
And a big thanks to VE3FI for bringing it to my attention.
Once again let me take you back in time where on June 1st and 2nd I had operated the SS Keewatin in the Museum Ships on the air event.
And if you look at the below PIC its quite clear that the Ship is in the dry dock
So now fast forward to today and I get notified that the Kingston Dry Dock is a National Historic Site and had been accepted as a Parks on the Air (POTA) location.
I quickly uploaded my logs for the Museum Event to POTA and now it seems that I was the first activation for the site (All Time New One)
Over the last few years I have hunted a few ATNO locations but in my feeble attempts of activating Parks this will most likely be my first (and only) activation of an ATNO….
So…. Thanks to all the hunters…..
73bob
And a big thanks to VE3FI for bringing it to my attention.
Remember yesterday when I mentioned the latest addition to my POTA setup, the Xiegu 5105 QRP rig….
Well this morning I decided to test it out and see how much work I would have to do with setting the parameters such as mic gain, processor, to make it sound like me… I was also testing out my EARCHI 9:1 unun with a 29.5 foot random wire to see how it would play with the built in AT of the 5105.
I figured I might as well do the testing at a POTA location just in case I was able to turn the test into an activation.
For this I chose Fort Frontenac POTA CA-5303. Its fairly easy to get there via the Kingston Transit system and its also close to downtown and all the amenities I might need. In the North East corner of the picture you will notice some white lines on the ground.
They are actually the walls of what’s left of that part of the Fort. Also the only parts of the Historic Site that is open to the public.
I leaned my MFJ 33 foot mast (supporting the 9:1 and wire in the vertical configuration) up against the tree.
And then ran the COAX over to the remains of the wall and set up my radio there and started operating.
My first contact was on 7.255 with the NCS of the ECARS net. He did hear me and considering I was QRP I was pleased. He did tell me that my audio seemed hot as if I was overdriving things. Lowering my voice seemed to help.
After that I looked at POTA Spots and managed to get W2IDG and VE3FI into the log from their parks and then finished up with the NCS of the MidCars net on 7.258.. All contacts were made on 40m SSB. I tried 20 SSB and was hearing lots of stations including a POTA Activation in VO1 but no luck breaking any of the pileups.
Then I figured it was time to get home and try to re configure the radio to my liking… I turned off the Speech Processor and lowered the Mic Gain from 60 to 40. Over the next few days I will get out again and see what else I have to do to get things sounding right.
Remember yesterday when I mentioned the latest addition to my POTA setup, the Xiegu 5105 QRP rig….
Well this morning I decided to test it out and see how much work I would have to do with setting the parameters such as mic gain, processor, to make it sound like me… I was also testing out my EARCHI 9:1 unun with a 29.5 foot random wire to see how it would play with the built in AT of the 5105.
I figured I might as well do the testing at a POTA location just in case I was able to turn the test into an activation.
For this I chose Fort Frontenac POTA CA-5303. Its fairly easy to get there via the Kingston Transit system and its also close to downtown and all the amenities I might need. In the North East corner of the picture you will notice some white lines on the ground.
They are actually the walls of what’s left of that part of the Fort. Also the only parts of the Historic Site that is open to the public.
I leaned my MFJ 33 foot mast (supporting the 9:1 and wire in the vertical configuration) up against the tree.
And then ran the COAX over to the remains of the wall and set up my radio there and started operating.
My first contact was on 7.255 with the NCS of the ECARS net. He did hear me and considering I was QRP I was pleased. He did tell me that my audio seemed hot as if I was overdriving things. Lowering my voice seemed to help.
After that I looked at POTA Spots and managed to get W2IDG and VE3FI into the log from their parks and then finished up with the NCS of the MidCars net on 7.258.. All contacts were made on 40m SSB. I tried 20 SSB and was hearing lots of stations including a POTA Activation in VO1 but no luck breaking any of the pileups.
Then I figured it was time to get home and try to re configure the radio to my liking… I turned off the Speech Processor and lowered the Mic Gain from 60 to 40. Over the next few days I will get out again and see what else I have to do to get things sounding right.
People who know me have heard me say that after all these years there are 3 radios I have sold that I actually regret selling. Well now there are only 2 radios that I regret selling…
.
Welcome the Xiegu X5105 back into my portable shack…
.
Between my FT991a and my FT891 there was a bit of a gap. The Yeasu FT891 Portable Station was a bit too heavy for my old bones. I needed something in a lighter backpack to make it easier to carry if I was to choose to activate one of the local POTA Parks here in Kingston.
The above pic shows my old X5105 with the Bandspringer attached
The Xiegu X5105 fills that gap. With the built in battery pack, the built in automatic antenna tuner along with the contest keyer and the built in CW Decoder it makes it a dream portable station.
My antennas are a 40m EFHW made with 28ga wire and a QRP AMAZON 49:1 unun. I also can use a 29foot end fed random wire using a QRP EARCHI 9:1 unun.
I also have the SOTABeams Bandspringer antenna that plugs right into the antenna input and uses the built in tuner to operate between 10m and 60m.
So what’s the other two radios you might ask?
Above is my first QRP setup. FT817, LDG QRP Autotuner.
If I could work a deal for a Yaesu FT817 and a Flex 1500 it would complete the list. However used rigs are pricy and it seems most hams think that radios seem to appreciate with age so like I mentioned above it has to be a good deal for both the seller and myself.
People who know me have heard me say that after all these years there are 3 radios I have sold that I actually regret selling. Well now there are only 2 radios that I regret selling…
.
Welcome the Xiegu X5105 back into my portable shack…
.
Between my FT991a and my FT891 there was a bit of a gap. The Yeasu FT891 Portable Station was a bit too heavy for my old bones. I needed something in a lighter backpack to make it easier to carry if I was to choose to activate one of the local POTA Parks here in Kingston.
The above pic shows my old X5105 with the Bandspringer attached
The Xiegu X5105 fills that gap. With the built in battery pack, the built in automatic antenna tuner along with the contest keyer and the built in CW Decoder it makes it a dream portable station.
My antennas are a 40m EFHW made with 28ga wire and a QRP AMAZON 49:1 unun. I also can use a 29foot end fed random wire using a QRP EARCHI 9:1 unun.
I also have the SOTABeams Bandspringer antenna that plugs right into the antenna input and uses the built in tuner to operate between 10m and 60m.
So what’s the other two radios you might ask?
Above is my first QRP setup. FT817, LDG QRP Autotuner.
If I could work a deal for a Yaesu FT817 and a Flex 1500 it would complete the list. However used rigs are pricy and it seems most hams think that radios seem to appreciate with age so like I mentioned above it has to be a good deal for both the seller and myself.
Last night around 9pm I was browsing Amazon and found the same 64:1 unun that I use with my 40m EFHW. This antenna is my primary antenna for my “Transportable/POTA” setup with my FT891.
I decided that the last one worked so well for me that it was time to see if the 1st one was the real deal or a fluke.
Around noon today I checked my front door and found the Amazon Fairy had magically made the new 64:1 unun appear sometime between 10am (last time I checked for it) and noon.
I had a spare 100 foot roll of Princess Auto 18ga insulated wire in the shack and as a bonus for my home environment is was even green.
I quickly measured out 64 feet and then did the connection things. As with most of Eastern North America it was a rather wet day.
Around 4pm locally the rain stopped and I was able to remove the old wire and install the new antenna, once again using the fir trees on the edge of my yard for camo as not draw attention to the antenna.
The SWR is pretty good especially for a wire hidden in the branches:
6m – 2.5:1, 10m – 1.7:1, 12m- 1.2:2, 15m – 1.6:1
20m – 2.0:1, 40m – 1.3:1, 80m – 3.0:1
The bands are not the best, but signal reports (90w output pwr) were fairly well (S7-S9+) with the stations that I was able to contact.
All in all for what it is…. I’m impressed and the best part is that using the built in auto tuner on my Yaesu FT991a I can easily bring it down to 1:1 on all the bands listed above.
The results are the same on my Yaesu FT891 with the same style of balun and a 64 foot length of quality (Red) Princess Auto 18 ga automotive wire. The only real difference is that as I use the 891 with no tuner I have to be careful on some of the bands.
As the new install gets more use I will let you know if there are any “issues” with its performance.
Login
