Linux PIC16F628 programing on the cheap
Had to program a 16F628 PIC for a frequency counter kit that let the magic smoke out.
First I tested with the PIC included on a different kit to see if would work, in fact looks like all these kits use the same code from DL4YHF.Β Β
The programmer diagram was a re-use of one that I used in the past, see schematic:
Β
Β From here and other ideas here.
Β I had some problems making it to run on the laptop but using the serial port from the desktop it worked.
Commands to use were this ones:
# picprog --device=pic16f628 --pic /dev/ttyS0Β --erase
# picprog --input-hexfile=counter2.hex --device=pic16f628 --pic /dev/ttyS0 --burn
(Picprog version 1.9.1)
I did not had a serial port plug so resorted to use some terminals, for a one of, it's ok
The assembly re-using the board from another test project:
The programmer that had the PIC issue, now running:
Β and the clone kit used for testing the PIC:Β
...eventually one day ill get a "proper" programmer but for one PIC every so often it's perfectly fine this way.
That's it, have a nice day!