-- This is the first podcast from SolderSmoke Shack South:   Eastern tip of Island of Hispaniola.  Cap Cana, DR, 70 feet up, 1 mile from Mona Channel.  Seventh floor shack with view of the ocean.  Antennas:  Dipoles for now, maybe Moxons or Hex later. STARLINK

- The San Francisco case against me.  One guy thinks we DESERVE prosecution!  Get off of my lawn! 

But one fellow wrote letter to the mayor asking for leniency.  Proposes "Bill Meara Day in SF." FB!  I fell victim myself this year:  Mike WU2D got me with WA1HLR on SSB video. https://www.youtube.com/watch?v=NLvCNJ_OnEc

-- Dean:  Fighting a spur in the sBITX.  Filters? 

-- Dean:  Exploring Class A, Class AB and the RD06HHF1

-- Dean: Extensive work on getting flat gain from FETs up through 10 meters. 

-hh- Dean and Bill:  OIP3 measurement and setting the bias on an RD06HHF1

-- Pete:  Discovers for all of us "RF Man"   In spite of all the CB stuff, he is the THE MAN!  On YouTube:https://www.youtube.com/@rfmanchannel6915

-- Pete fixes Dean's relay chattering problem: SUBTHRESHOLD CONDUCTION!  Yikes!  

-- Pete's refurb and rejuvenation of the Drake Twins, 

-- MXM news.  New docs, and ads from WD5L. All on the blog. 7030 crystals.  Why MXM? Chuck Adam's mods, Joh DL6ID's questions about VFO.  Yes!  VFO from RX.  Was Bruce Williams an early Swan Designer? 

-- Weird paradox with 25 MHz filter:  Low profile xtals have higher Q, but produce more rounded passbands.  Why?  I note that Minima's 20 MHz filter also had curved passband. 

-- Allison's wisdom on filters at higher frequencies.  The importance of physical layout.  Diodes in the dark!  It is indeed more difficult up there.  But don't let the perfct be the enemy of the good!

-- Is Bill  the only one to ever build a 10-15 Dual Bander using a 25 MHz crystal filter.  Why?  Farhan's Minima has a 20 MHz 6 pole QER crystal filter.  And it too had a rounded passband.  But it tooc WORKED.  

-- Did my receiver sound tinny due to rising frequency response of uBITX Rev 4 amp?  Yes! So I put in a  TJ DC RX Af amp.

-- Bill BLOWS UP a Tiny SA Ultra. Ooops.  But quickly got a new one from R&L Electronics.  Very, very useful.  I knew 25 MHz IF rigs were inferior, but by how much?  How much was the carrier suppressed?  Which filters worked better?  What was the opposite sideband rejection.  TinySA permitted measurement and comparison. 

-- Bill quit 15 meter SSB (for a moment) and went to the 1.22 nanometer band with a Wilson Clound Chamber.  Videos on the blog. 

SHAMELESS COMMERCE:  Thanks to new Patreon sponsors.  I am sending some additional video content to the sponsors.

MAILBAGg

-- Thanks to Bob Crane W8SX for FDIM interviews.  I will get them out! 

--Wes -- W7ZOI has a new TIA amp with variable gain on his web site: https://w7zoi.net/

-- Geoff N6GWB's Rad Receiver https://soldersmoke.blogspot.com/2024/04/the-rad-receiver-from-n6gwb.html

-- Dave K1KA sent Ensemble RTX SDR parts.   Thanks Dave. 

-- Chuck Adams AA7FO provided good background on my MXM rig, including the meaning of MXM (1990) . Again, great to hear from Chuck, a true homebrew hero.

-- Gerardo HI8P collecting info on the other HI8P, my friend Pericles (SK) 

-- Alvin N5VZH picked up a Silktronix CB VFO.  What to do? 

-- Jorgen SM4WWG listening from Sweden, and making PCBs.  FB! 

-- Mike WN2A  Wondered about opposite sideband rejection of MXM.  Not great. 

-- George WB5OYP loaned me a book from Elmer Bucher.  THE Elmer?   https://k9zw.wordpress.com/2020/01/24/on-the-origins-of-elmer-a-reasonable-theory/

-- Wes W7ZOI, Farhan VU2ESE -- Thanks for help on filter issue. Thanks too to Alan W2AEW and G3UUR

-- Josh G3MOT -- Nice message of support in our "struggle" with SF authorities. Going portable to Vancouver island in August.  VE7/G3MOT

-- Paul VK3HN -- Antipodean solidarity.  Thanks Paul. 

-- Rogier PA1ZZ -- great input and help. Thanks

-- Tony G4WIF reminded me of G3ROO's  parasets.  See Blog

-- Pavel CO7WT His experiences (building, freezing, heating) the VFO in the Jaguey DSB rig.

-- Grayson KJ7UM Sent latest ER with his Collins 51S-1 story. Thanks Grayson. 

-- Allison KB1GMX  Commiserating on higher freq crystal filters. Thanks Allison 

-- Wes W4JYK Notes that Dewey, Cheatam and Howe are based in SF. Can they help with sticky sticker problem? 

At the time, Tektronix was located in Portland Oregon. While working on a wideband vertical preamp for a new scope (the 7A11 vertical plugin for the 7000 series scope), John Addis was plagued with interference from the local television broadcast station in the 50MHz band. So, he popped in a 20MHz low pass filter that he could switch in/out so that he could complete the work on the preamp. Since it was deemed useful, it was left in the design. 

And, since Tektronix added a switchable 20MHz low pass filter  in their scope, and Tek was the leader in oscilloscope technology, other manufacturers followed suit, and this feature has "stuck" as a staple in vertical setting controls. 

The main reasons you'd use this filter would be to improve the signal to noise ratio (SNR) for signals when their frequency content is below 20MHz.   You've probably noticed that, even without any signal connected, the thickness of the trace is thinner when you engage the 20MHz filter. 

---------------------

Alan sent a link to a Wiki page about the 7A11 that John Addis was designing.  Alan says this places the initial inclusion of the 20 MHz BW Limit filter to the mid 1960s: 

https://w140.com/tekwiki/wiki/7A11. 

Thanks Dean, thanks Alan!