As I have gotten older, the heat and I don’t get along very well anymore. So, with the heat and humidity forecasted for today, I was just going to stay home and get caught up on some things around the house. My (far) better half intervened and encouraged me to go out early before it got too hot. She’s always right, so off I went.
I drove down to Ridley Creek State Park (US-1414, KFF-1414) and found a parking spot with some shade. Along with my Penntek TR-35 (5 watts, CW), I used an MFJ-1979 17-foot whip with my homebrew loading coil.
I started out on 40M and wound up staying there for my whole activation. The band was in pretty good shape, as it only took about eight minutes to log my first 10 contacts.
About 40 minutes into my activation, I got a call from my (far) better half. There was an issue at home, so I packed up and headed out.
I ended up with 20 contacts this morning, with four known park-to-park contacts. One contact was with fellow QRP enthusiast, Jim W1PID. It’s been a while, so it was nice to hear him again. One of my park-to-park contacts was with QRPer Thomas K4SWL. We had a very light copy on each other, but he persevered and eventually pulled me out of the noise. Thanks for your patience, Thomas!
On an unrelated note, it’s great to have Logbook of the World (LoTW) back up and running, after a serious cybersecurity incident. The system also seems to run much faster now, so it’s nice to see the backlog steadily declining. I’m guessing things should be back to normal in the next week or so.
Finally, I’d like to wish my fellow Americans a very happy and safe Independence Day!
72, Craig WB3GCK
A great add on to the MPAS kit or just as a stand alone.
I do find the counterpoise wires o be too thin and prone to breakage and want Chameleon to go back to the #16 Kevlar wire they are known for
Also the short length of the whip on20m is a bit finicky due to the ground I had but a grassy ground is usually pretty good but the radiation resistance was kind of low.
The kit adds items I dont have in my MPAS kit making for a well rounded deployment kit similar to this:
CHA MULTI CONFIGURATION COIL
The core component of the CHA PRV antenna, known as the CHA MCC (Multi Configuration Coil), serves as its foundation. The CHA PRV antenna is skillfully engineered and built to withstand rugged conditions, making it particularly suited for demanding portable applications such as Parks On the Air (POTA), Summits On the Air (SOTA), and other outdoor radio pursuits that necessitate an antenna that’s both efficient and easily transportable. This antenna is also an excellent choice for radio enthusiasts who reside in environments like RVs, apartments, or condos, where space is limited to a small balcony or patio.
Chameleon Antenna has designed the CHA PRV to perfectly complement the latest generation of compact multi-band/multi-mode QRP transceivers, including models like the Icom IC-705, Xiegu G90 or X6100, LAB 599 TX500, and the Yaesu FT-817/818.
SPECS
Power Handling: 500W SSB 300W CW 200W DATA
Materials: Anodize Aluminum OD Green, White Delrin, Stainless Steel and Silver Plated Copper wire
Bands Coverage: 2M to 40M with the SS58
DIMENSIONS
Diameter = 1 1/4″
Length Collapsed = 12 1/2″
Length Extended = 19 1/2″
Weight = 0.94 lb.
CHA MCC
1 X CHA MULTICONFIGURATION COIL
CHA PRV SOTA (LIGHT KIT)
1 X CHA MCC (Coil)
1 X CHA SS58
1 X CHA SPIKE MOUNT
1 X CHA PUCK HUB
4 X CHA TENT STAKES
4 X CHA B-RADIAL (12’6″)
4 X CHA WINDERS
1 X CHA WW RADIAL (34′)
1 X CHA TRIPOD ADAPTOR
1 X CHA 12′ COAX w/ integrated RFI Choke
CHA PRV POTA (HEAVY KIT)
1 X CHA MCC (Coil)
1 X CHA SS58
1 X CHA SPIKE MOUNT
1 X CHA PUCK HUB
4 X CHA TENT STAKES
4 X CHA B-RADIAL (12’6″)
4 X CHA WINDERS
1 X CHA WW RADIAL (34′)
1 X CHA TRIPOD ADAPTOR
1 X CHA EXTENDER12
1 X CHA UCM
1 X CHA 12′ COAX w/ integrated RFI Choke
I recently spent some time in Central Pennsylvania at my daughter’s house. Since I was going to be there a while, I brought along my Raspberry Pi hotspot. While I’m not really active in digital voice modes (or any voice modes, for that matter), there are a couple of DMR nets I like to check into each week.
One issue I ran into in the past, is that my hotspot refuses to connect to their Wi-Fi network. Their Wi-Fi SSID has both an apostrophe and a space in it, so I’m guessing that’s the issue. I could have connected the hotspot directly to their router via an ethernet cable. Because of their router’s location, I would have had to move some furniture and put the hotspot in an awkward location. So, this time around I brought a little travel router to try another approach.
Back when I was working, I had a TP-Link Nano router that I took on business trips. Typically, I would connect it to an Ethernet port in my hotel room to create a personal Wi-Fi network for my laptop and phone. A while back, I upgraded to the newer (and faster) TP-Link TL-WR802N travel router. I don’t travel nearly as much these days, so the new router hasn’t seen much use.
I brought the travel router along on this trip to create a wireless bridge from the house’s Wi-Fi to my personal Wi-Fi. The router’s Wi-Fi network has an SSID that my hotspot likes. I haven’t used that mode much, so I had to resort to the user manual to refresh my memory on how to set this thing up.
Actually, it was pretty easy to set up. It was simply a matter of connecting my laptop to travel travel router’s Wi-Fi to access the admin functions. From there, I set it up in the “Hotspot Router” mode. Then, I scanned to find the house’s Wi-Fi network and logged into it.
Testing the internet connectivity with my laptop, the speed looked good. I had previously added my travel router’s SSID and password to the hotspot, so soon after powering up I was hearing the sounds of DMR coming from my HT. This configuration worked great, and I successfully checked into a few nets during the week.
The next time I go out there to visit, I’ll just need to power up the router and the hotspot, and everything should work. (Knock on wood)
No ground-breaking technological advances here. I just love when a plan comes together.
73, Craig WB3GCK
[Disclaimer: I have no monetary interest in this product, and there are no affiliate links in this post. I’m just a satisfied owner.]
While still on my extended stay at my daughter’s house in central Pennsylvania, I wanted to do some casual operating. So, I set up in the backyard to make a few contacts.
Today, I decided to give my Gabil GRA-7350TC vertical some air time. It’s been a while since I’ve used it. I set it up using the Gabil GRA-ULT01 MK3 tripod. I had forgotten how well engineered the Gabil stuff is. Anyway, I used four 15-foot speaker wire radials spread out on the ground. For the coax, I used 20 feet of RG-174.
I started out on 40M. Using an antenna analyzer, I got the SWR down as far as I could and let the KX3’s tuner do the rest. Taking a quick dial spin down the band, I didn’t hear much at all. Eventually, I came across WA2NYY activating a park in New York and called him. Despite the horrendous band conditions, he heard my 5-watt signal on the first call. Next, I heard an activator in North Carolina, but I had a rough copy. We still managed to complete the contact.
I then moved up to 20M and found the same crappy conditions. Eventually, I found and worked two more POTA activators.
I checked the POTA spotting page and saw that there were a couple of European activators on 15M. I tuned up the antenna and did a quick check. Nothing but dead silence across the band.
It was at that point that I checked the band conditions online and saw that there was a severe geomagnetic storm in progress. It showed poor conditions on all the HF bands. That certainly explained the lousy band conditions.
Not being a glutton for punishment, I shut down for the day. Still, I was thankful for the four contacts I made with five watts of CW into an eight-foot base-loaded whip during a severe geomagnetic storm.
72, Craig WB3GCK
I mentioned in a previous post that I’m out in central Pennsylvania, doing some house sitting for my daughter’s family and taking care of my grand-dog. I wanted to get in at least one park activation while I’m here, but I didn’t want to leave the pup alone for too long. Fortunately, Pennsylvania State Game Lands 246 (US-8941, KFF-5862) is just minutes away.
I last activated PA SGL 246 back in 2022 and had 34 contacts. So, 10 contacts this time would not only qualify another activation for Parks on the Air (POTA), but it would also give me the 44 contacts needed for World Wide Flora and Fauna (WWFF).
I rolled into the empty parking lot and quickly set up my 12-foot loaded whip on the back of the truck. My rig today was my trusty KX3 today (5W, CW).
I started out on 40M and was greeted with about S2 worth of noise. I’m guessing it was coming from a power line that runs over the parking lot. Despite the noise, I made 10 contacts in about 13 minutes. Then things seemed to dry up.
I moved up to 30M for a while, but there were no takers. Determined to add at least one more contact, I went back down to 40M. It took a few minutes, but I finally got one more call.
Around that time, it was starting to get hot in the truck. I also neglected to grab my water bottle as I headed out the door. Doh! So, having narrowly exceeded my goal of 10 contacts, I packed up before I got too dehydrated. Besides, I had an errand to run before heading back to the house.
After about 30 minutes of operating, the grand total today was 11 contacts. I don’t think I had any park-to-park contacts.
I think this might have been the shortest activation I have ever done.
72, Craig WB3GCK
I’m currently out in the Harrisburg, Pennsylvania area for a week of house and puppy sitting for my daughter. My companion for the week is a five-year-old German Shepherd named Belle, who was adopted by my daughter and her family nine months ago. She’s a sweet dog, but she sometimes has some separation anxiety. So, I’m making sure my ham radio activities are short and close to home.
The first two days of my puppy sitting duty coincided with this year’s Field Day, so I did a little “backyard-portable” operating as category 1B. In my nearly 50 years of ham radio, this was my first-ever Field Day using my own callsign.
My plan was simply to set up an antenna in the backyard and make a few contacts each day. The weatherman was calling for dangerously hot temperatures over the weekend, but there’s a section of the yard that has some shade for most of the day.
My (far) better half came out for the weekend. While I was surveying the backyard trying to determine what antenna to use, she suggested strapping “that fishing pole antenna” (aka Jackite pole) to my grandson’s basketball pole. Great idea! So, I strapped my 31-foot Jackite pole to the pole and used a 29-foot wire and my weather-resistant 9:1 UnUn. I ran 18-feet of RG-8x over to the two chairs that served as my makeshift operating position. My rig was an Elecraft KX3 (5 watts, CW) powered by a 6 Ah LiFePO4 battery.
I started off logging contacts in HAMRS on my cell phone. That lasted for about two contacts before I switched to paper logging. I wanted to keep things simple and forgo using my laptop, so paper logging was just easier for me than using my cell phone.
With temperatures in the high 90s (F), I only stayed out there for two brief sessions on Saturday. When a strong thunderstorm blew through, I called it a day.
After breakfast Sunday morning, I went back out to make a few more contacts before the weather heated up again. When I called it quits, I had 62 CW contacts in the log, including one DX station (France).
My three hour effort didn’t break any records, but it was fun. I just wish the weather had been cooler, and I could have done without the thunderstorm.
I hope everyone had a fun Field Day weekend.
72, Craig WB3GCK
Login
