The latest August edition of the RadioWorld Magazine has included an article by James Careless about the use of software defined radios for shortwave radio listening. RadioWorld is a magazine targeted towards radio broadcast owners, managers and engineers all over the world. The article explores SDRplay and RTL-SDR Blog V4 units from the perspective of a shortwave listener new to software defined radios, comparing them to his high-end Sangean ATS-909X2 shortwave digital receiver.

The article can be accessed freely from this link and is found on pages 18-21.

In one of his latest videos Matt from the Tech Minds YouTube channel tests out the RX888 MK2 software defined radio at HF frequencies. Matt notes that while the bandwidth of this SDR is limited to 10 MHz at VHF/UHF, you can actually use it in direct sampling mode to achieve a massive bandwidth of 64 MHz, allowing you to receive the entire HF band at simultaneously.  

In his video, Matt uses SDR-Console V3 and he shows the entire HF band being received at once. He also shows the SDR-Console V3 matrix bands organizer, which allows you to create multiple windows of zoomed-in spectrum. That combined with the multi-receiver feature could allow you to have multiple audio outputs for digital decoding across the HF band.

Thank you to Ihar Yatsevich for writing in and sharing with us his open-source WSPR beacon project. The WSPR beacon consists of a custom PCB with ATMega328 microcontroller, GPS module, single transistor amplifier, and Si5351 with TCXO.

The result is a very simple, portable WSPR beacon that can be heard all over the world. However, it appears that no band filters are built into this, so you will need to add a bandpass filter for the WSPR band that you are using.

WSPR (Weak Signal Propagation Reporter) (pronounced "whisper") is an amateur radio digital HF mode designed to be decodable even if the signal is received with very low power. Because of this design, even low-power transmitters can be received from all over the world. It can also be used to help determine HF radio propagation conditions as WSPR reception reports are typically automatically uploaded to wsprnet.

If you are interested, Ihar has written about his project in more detail over on Reddit. 

Over on the Tech Minds YouTube channel, Matt has uploaded a new review and demonstration of a Malahiteam DSP1 SDR Receiver 50KHz - 2GHz. This particular unit appears to be a Chinese clone unit which is actually called a 'Malahit SDR'. The Russian company Malahiteam makes the original units, and they come in a different enclosure and feature the full Malahiteam logo.

In the video Matt shows this version of the Malahit DSP1 in action, noting that the built-in speakers sound great and that RF performance seems to be good. He does however note that the enclosure is a bit cheap, being built out of PCB boards, and that the top encoder knob sometimes doesn't work properly. Overall Matt mentions that he probably wouldn't buy it at the current ~US$180 price point, noting that better newer models like the DSP2 and DSP3 already exist.