❌

Normal view

There are new articles available, click to refresh the page.
Before yesterdayQSO365

That’s N5J in the log for DXCC #304

By: g6nhu
8 August 2024 at 17:30

Anyone who chases DX can’t fail to have noticed that the Jarvis Island DXpedition is now on air and has been for less than 48 hours. I did have a listen yesterday but didn’t hear them anywhere. I set up HamAlert notifications specifically for N5J with the source set as G, GM and GW in […]

The post That’s N5J in the log for DXCC #304 first appeared on QSO365.

How to set up a HamClock for your shack

By: g6nhu
12 May 2024 at 08:49

I appreciate that the last post here was about the HamClock and I said I wouldn’t be providing a guide to building one but I’ve been asked by a few people if I can write some instructions, showing what’s needed from start to end so I’ve decided to do it. This is a long guide […]

The post How to set up a HamClock for your shack first appeared on QSO365.

How to build a shack clock using a Raspberry Pi and a 7β€³ Touch Display.

By: g6nhu
20 May 2023 at 13:43

A few weeks ago I bought the official Raspberry Pi 7β€³ touchscreen display for a project which sadly didn’t work as intended, this left me with the unused display and a case. I started thinking about things I could use it for and settled on a shack clock. Long term readers of my site will […]

The post How to build a shack clock using a Raspberry Pi and a 7β€³ Touch Display. first appeared on QSO365.

New aerial – I’ve decided!

By: g6nhu
7 March 2023 at 20:27

After much research, I’ve decided what I’m going to replace the Hexbeam with. I’m aiming to put up a SteppIR UrbanBeam which will give me the same coverage as the Hexbeam with the addition of a folded dipole on 30m. At the same time, I’m going to replace all the coaxial cable with Messi & […]

The post New aerial – I’ve decided! first appeared on QSO365.
❌
❌